Performance For a 94 Lt1

What kind of engine parts would any of you suggest for a 94 Lt1, What kind of cam, chip, heads, exuast... anything that will increase my power what do you think i should put on there (within a certian $$$ limit)

thanks

Start with Corsa exhaust 700, jet stage 2 chip 250, and Hooker Headers 500. You could get all that and installed for about 1700 total. That should increase your hp by about 30rwhp and 45lb/ft of torque. You will move for sure and sound like your pushin 600-700 hp.....have fun and good luck!!!

here is something for cheap http://proficientperformance.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=HT-350852&Category_Code=ht_tuning-module_gm_car&Store_Code=PP
what is your budget? and is it a 5.7 v8 or not?

i got that for mine diablo, but i havnt gotten
it yet. seems to be a cool mod.

ya i know you lucky bastard... your getting too much on your 94 lol... why dont you get anything for yor ls1?

well i done the ls6 deal i really dont want to tear
it up, its just a saturday night car, it was just
to give her that edge that she needed. i plan on
turning the 94 into a drag car, there is a guy
that has a 96 z28 that has every mod under the
sun i dont think there is a word to describe
just how fast that car is. he is running nitrous too.

what are the 1/4 times and 0-60?

get a cold air intake for it, it needs it the original intake was not designed to push enough air for a 305 never mind a 350

then open up the exhaust a cut out is cheap or a cat back to be loud

how much money are you gonna spend....

get a cold air intake for it, it needs it the original intake was not designed to push enough air for a 305 never mind a 350

then open up the exhaust a cut out is cheap or a cat back to be loud

how much money are you gonna spend....

wait wait...what WHAT?....I dont think i'm hearing you properly....a cut out for noise and catback for power?? A cutout will add way more hp than a catback!!! A cutout is louder and more powerful but illegal in most states. It doesnt even take that much torque from a 350.

i am probably pulling my 383 this week or next and selling it....

how much?? and why are you pulling it out

I owe A LOT of money to some places, so the car has to go. Hard to sell the car 'as is' since people do not have the $$, so I am going to sell the Engine and return the car back to as close to stock as I can before selling it. Probably gonna ask $4k for the engine.

i was thinking a cat back would be loud all the time and a cutout will only be loud when you open it up

and they will both give you power i wasn't singling out the cat back as the power adder, i just really need to learn how to punctuate my replies.