Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

Big Dreams


Vanished
06-06-2004, 11:41 PM
OK. So i'm only 15, but i've been dreaming like mad about cars, and i'm getting pretty seriouse . I've narrowed down my disision of a car to an mx-3. I found one in quebec for 2000 (amazing i know) but i think its too good to be true. http://www.canadatrader.com/trader/result/result.asp?r=%271011%27&mk=MAZDA&md=MX-3&yfr=0&yto=0&GoSearch=Search&kw=&kfr=0&kto=0&pfr=0&pto=0&dm=1&dp=4&or=0&oby=7&IsSr=1&rubno=4000&sid=&ste=&task=
I've also narrowed down my first mod to the car, egine swapping it to a KL-ZE. Are my dreams out of porportion, or are they totatly possible? If anybody could give me any feed back that would be asome

firefly948
06-07-2004, 02:43 PM
They are possible. 2000 for a car is really good. I got mine for 1800usd. The KLZE is definitely a good choice, as well as a relatively affordable one. It'll boost your hp by 65 hp, and gives you a better platform for other mods.

as far as that car being too good to be true, I tried the link, but I don't know which one you're looking at. 2000 for a MX3 is pretty good
Is is V6 or 4cyl.

Vanished
06-07-2004, 06:49 PM
Ok, well i'm planning on getting a V6 so i can enjoy the car some before i put the engine in. I've found an egine for 1150$ canadian at http://www.jspecautosports.com/jas/html/mazda.html. Around how much would it cost me to have it installed, and for extra parts i would need?

bmwm3guy
06-07-2004, 07:51 PM
A basic KLZE swap will put you out around 2500$ for parts, engine, and installation. Depending on how much u pay for an install, some people will do it for around 500-700$. A clutch for the 2.5L is around 400$, and you may as well change the timing belt, water pump if needed, spark plugs, ignition wires etc.. what area are you in? my msn is [email protected] if u want any answers

MX-Master
06-07-2004, 09:23 PM
do u neeeed a new clutch bc ive never heard that before and if u do then crap bc i dont have the money for that now and im in the middle of my swap

bmwm3guy
06-07-2004, 11:00 PM
I dont know for sure, but from what I see, the 1.8 clutch and the 2.5 clutch are different. Plus, maybe its me but a K8 stock clutch would turn to mush with 200hp or more running through it.

Vanished
06-07-2004, 11:41 PM
ok, well if you could email me a list of parts that i would most defantly need for a well used mx-3, (after a swap) that would be good. I'm planning on getting a performance clutch, spark plugs and ignition wires anyway. Thanks for the help, and keep it comming. I'm in saskatoon, so if your around the area and your planning a swap, give me some info on were your getting the swap done, and were your getting your parts from.

bmwm3guy
06-08-2004, 01:19 PM
Im from the Ottawa area so we're kinda far away :P this is my shopping list for my swap if it helps.

KLZE
Clutch Centerforce Dual Friction
Tranny from a Probe GT
ECU KL-31, KL-36 - 400$
Vaf JE50 (this is the on you have on your K8 right now, so keep it)
Clutch bearing
Oil filter
Spark plugs
motor oil
Transmission oil
coolant
timing belt

**Not necessary, but a good idea none-the-less**
Brembo front cross drilled, and slotted rotors
KYB GR-2 Shocks
Eibach Springs
Fuel-pressure regulator
Air/fual ratio guage
lightweight pullies
headers? maybe if I can find some true "bolt-on" ones.

I mightve forgotten a few things but i think its all there.

MXmadman
06-08-2004, 01:56 PM
PARTS! PARTS! PARTS!

http://street-import.com/catalog/index.php?cPath=21

Vanished
06-08-2004, 05:40 PM
hey man, thats cool ur in ottawa. Thanks for the list that helps alot! How much is the tranny and were do you get clutch bearings from?

Vanished
06-08-2004, 05:44 PM
Oh yah, if i were shopping for mods for the KL-ZE what car would i buy the parts for, mx-6 or probe or just mx-3?

bmwm3guy
06-08-2004, 07:24 PM
depends on the part, but most likely mx6 or probe when it comes to the engine. The clutch bearing goes for around 60-70$ i think. I got mine from www.street-import.com

Vanished
06-09-2004, 06:40 PM
Thanks!

babybluemx3
06-09-2004, 10:42 PM
normally the clutch comes in a "kit" including...pressure plate...disc...realease bearing....pilot bearing (not sure about that one)..and alignement tool....jsut make sure if you buy a clutch that these parts come with it

Vanished
06-09-2004, 11:51 PM
Ok cool, now i need to go get a job quickly so i can buy the darn car!

lone_night_fox
06-10-2004, 07:59 PM
I found one in quebec for 2000 (amazing i know) but i think its too good to be true. [


I got my MX-3 V-6 for 2,400 USD and it only had 93,000 miles... so depending on mileage... it should be a pretty good deal...

Vanished
06-12-2004, 10:25 PM
Wow, thats cool. I dunno about somethin though, i was looking in saskatchewan and the cheapest if under 5k-over 4k. Is there a reason for that? I'm trying to get the cheapest possible, maybe even one that has a really really really bad motor and trans. If you know of any sites that have adds of used cars in canada that would be awsome.

Add your comment to this topic!