Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


Low Clutch


pez
06-06-2004, 11:41 AM
i have a 97 cherakee limited, the clutch pedal was biting at the half way point, then suddenly droped and bit near the floor.Pumped it for some time and it was back to half way again. Now it has droped again and cant get it in to gear at all if engine is running. Is it the clutch or one of the cylinders(fluid in resavoir is full) any ideas would be a help as a clutch is very dear in uk.


THANKS IN ADVANCE

PEZ

SGT Rock
11-08-2004, 01:32 PM
I have a 1991 Jeep Cherokee 4.0 that is having similar problems. I left it in storage for over a year when I went to Iraq. Now that I am back, the clutch perdal acts funny. When it is cold, I have to pump it up to get it to get enough play in it to get it into gear, after using it a while it acts well enought to drive fine. I have bled it and ensured the fluid level is full. I ASSUME it is the slave or master cylinder, but I can't find any leaks, and there doesn't appear to be any air getting into the system.

95xjsport
11-09-2004, 09:28 PM
It sound like you slave cylinder is bad, I had a 92 ford explorer and had similar problams, a new slave cylinder fixed it.

bmwilson
11-12-2004, 12:27 AM
My 89 had this issue as well, but before I got it home it blew one of the lines. Age and old fluid I would guess, replaced the $20 dollor line after flushing all the old fluid out, and now it acts new.

Cam7
11-15-2004, 06:48 AM
Try Bleeding the slave cylinder have somebody pump the clutch pedal and hold open the bleeder valve just like brakes. Try a couple of times and check the fluid level. If no go probally a bad slave cylinder or possible a bad master cylinder.

dima4855
11-15-2004, 01:34 PM
have you tried to gravity bleed it?
If that does not work change the master cylinder, I had the same problem, then I changed my master and the clutch was perfect.

paulsenior
11-15-2004, 06:46 PM
I have a 91 XJ Sport, where is the bleeder valve, how do I find it?????

dima4855
11-15-2004, 07:35 PM
it's hanging of a hose that comes out from the slave cylinder in the bell housing

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food