lets hear your craziest idea

mine was combining 2 porshes into a beetle
944 front end, square tail in the rear bettle in the middle :evillol:
second the Flower car
a silverado modified into a modern day flower car.
third the mecha land yatch
i have to smoke psychadelics to build this scary beast thing
3 axles up front 6 engines 2 dually wheel sets in the rear. 4 feet long segmented jacuzzy in the rear also ending the HLJ suppy of mercedes S600s

My craziest ide was to build a civic or integra tuner into a fixed position Transformer. Be a lot of scratch building though

My craziest idea was to build a Tamiya 300ZX with a Revel Mustang Cobra front end. I atempted this last summer but I wasnt very good with putty so it didnt turn out that well. I might try it again this summer.

Everyone's almighty beloved GTR R34, cut hood, 70 chevelle LS6 454 Supercharged Big block chevy put into place. lowered, removed all nissan badges, irridescent paint, CF, full caged interior 2 racing seats, lots of gauges, sick headers, do luck body kit, and I think that's it

I have a supra engine etc that is going into a Caterham Seven in the near future.

I think that would be a pretty scary ride especially with a bit of tuning JUN style!!

Richie

In a time way back in the dark ages I started a project (not ever finished) to mate two of JoHan's Chrysler 300 1960-something. The plan was to get a stretced front and rear end and four wheels in the back. I also mated the two engines into a double V-8 configuration. I did put all of it togheter but never got as far as finishing it. Pitty, it would have been a cool ride!

Niclas

My craziest idea was to actually build a skyline, i dunno what i was thinkin. lol

Tube chassis RWD drag Civic. With an Allison V-12. I've got the motor, I've got the car... Just no the nerve.

put a big block engine in my tiny 95 grand am

yhea that al work
he he hee hheeHEE HEEEEE HA! HA! HA! HA!
aaaaa good times

i have 1

enzo hatch with r34 rearlights enzo guts , enzo engine , custom tube chassis , chopped top , extremely low , bodykit , system suicide / lambo doors all top off with fllat black pant and peanutbutter guts .

im thinking i mite go for it

The ER34!! Like NOMUKENS. I havent seen any of those complete with engine. And some as rice as you can get like a silvia front end with engine. ewww..but that would be cool. S15 Silvia with S13 Silvia front end.

Scratchbuilding a 1/6 hot rod. Its not the most idiotic, but it is crazy, and its a bitch.

My craziest idea and one I'm going to realise some day for sure is to fit the front of the new Celica, to the back of the old type. I liked the back of the old one, the back of the new Celica isn't that beautifull. I begs to be changed a lot!!! Besides, the Tamiya old Celica GT4 has an engine. The new Celica hasn't sooo... It seems to me there's a nice opportunity here :naughty:

Modify body of tamiya honda prelude(old school) into BB6 prelude, put a h22a in it.

i've always wanted to try something to make fun of "ricers"

http://www.anti-rice.com/rice5/mycar.jpg
http://www.mncgp.com/images/WTF/Ricer_exhaust.jpg
http://www.warehousemotors.com/item_images/253-40230-1511.jpg
http://www.horsepower.stangnet.com/images/ugly_rice.jpg
and the most hilarious of all
http://lnuxlab.ath.cx/~khromy/hugeWing.jpg

A semi grinding frame....:evillol:or a jet engine powered civic :grinno:

I was thinking of building a car with a Mercury Grand Marquis front end and a Crown Victoria Sport body and rear end, with really nice wheels. I was going to call it the 'Marauder'...

I don' think anyone would like it. :p

J. Barry

My craziest idea was to create a GT1 racer out of the Neon!

Wide fender extensions, mid-engine, the whole nine yards. The front was going to say "Hi!" and the rear was going to say "Bye!"

Alas, the only Neon is a "promo" that ended up being too danged costly to break up...

Bill

i've always wanted to try something to make fun of "ricers"


SchuberT, I just found this photo, same car that you posted...

http://www.dailyrants.com/images/funny/honda-wtf.jpg

haha!

J. Barry

lol that's classic!

my craziest idea was to start a model car. Heh its so damn hard to build these thigns. When i was painting mine, it got all bubbly and started running down the sides and stuff, and thats when i knew i should quit making model cars ;)

these are actually in-progress,
scratchbuilt srt-10 Rock Crwaler
1939 Chevy El Camino (no thats not a typo...)

I once thought about putting a blown hemi in a civic,but decide not to waste a good motor.

Lil'budman

I am waiting a Skyline R33 GT-R V-spec to come in. I already have a choice of 3 engines to fit in it. A small block daul cross ram 302 Chevy from a 69 Camaro, a fuel injected big block, or a blown big block. If I can win the auction on ebay I want to put a twin turbo, twin supercharger, nitrous small block with full tube chassis and wide slicks in back.

Don't try this at home kids:
http://www.consumptionjunction.com/downloads/cj_35414.jpg
All the rwhp that those exhausts produce could snap your neck.

J. Barry

widebody dodge daytona.....in progress

2 in progress (long progress)

Chevy C1500 (Truck) with the Shelby Series 1 engine, complete with transmission in the box. Completely slammed and shaved, rolling on like, 26s (gonna have dub city 20's with scratchbuild disk brakes and calipers) Custom rear suspension. Probably custom front suspension.

And a 1949 merc, also slammed and shaved, with a NASCAR spec Chevy V8 and rolling on Viper rims and tires. Corvette IRS out back. Requires rear subframe to be scratchbuilt.

So far both projects are in the cutting and fitting stages, and not nearly enough building and fitting.

me and my best friend are tryin to get our hands on a 4 rotor for our 87 rx7

and i knw a retard that thinks u can do 8 turbos on a small block chevy and or a minumal of 4 :banghead:

2 in progress (long progress)

Chevy C1500 (Truck) with the Shelby Series 1 engine, complete with transmission in the box. Completely slammed and shaved, rolling on like, 26s (gonna have dub city 20's with scratchbuild disk brakes and calipers) Custom rear suspension. Probably custom front suspension.

And a 1949 merc, also slammed and shaved, with a NASCAR spec Chevy V8 and rolling on Viper rims and tires. Corvette IRS out back. Requires rear subframe to be scratchbuilt.

So far both projects are in the cutting and fitting stages, and not nearly enough building and fitting.
Suggestion, instead of Dub city rims, find a 1/24 Import Racer with wheels you like. They come with drilled (cross) brakes with red calipers and a nice set of 19-22's.

Suggestion, instead of Dub city rims, find a 1/24 Import Racer with wheels you like. They come with drilled (cross) brakes with red calipers and a nice set of 19-22's.

I always find the Import Racer rims look really plasticy... I'll have to look again, I guess. I want them to be chrome, too. I know, I know. Alclad II. But I don't have any of it (and it's $14 for a fl. oz. up here). And I don't have an airbrush that'll do a good job. But I do have Duplicolor chrome (which ain't all that great). Anyway, thanks for the tip, and I'll keep my eyes open.

and i knw a retard that thinks u can do 8 turbos on a small block chevy and or a minumal of 4 :banghead:

Check it out.
http://www.lateral-g.net/sandlin/sandtubing.jpg

http://www.lateral-g.net/sandlin/

Cheers!

Mark. I have the Lexus GS430 Import Racer, the rims are chrome, and it has some nice tyres with some fine brakes. If you'd like, I can post pics

Mark. I have the Lexus GS430 Import Racer, the rims are chrome, and it has some nice tyres with some fine brakes. If you'd like, I can post pics

Haha I was about to buy the Lexus GS430 dub city since it has 2 sets of rims and I like the paint scheme. I've seen the import racer GS430, but don't remember what the rims were like. Like I said, I'll have to look again.

Nuttyness.

Wow. Holy wow. I won't doubt that you make some power there, but... more money than brains. Does each intake charge go to each cylinder or do they all go together to a big intake manifold?

Wow. Holy wow. I won't doubt that you make some power there, but... more money than brains. Does each intake charge go to each cylinder or do they all go together to a big intake manifold?

No clue. I was wondering the same thing.

For the record, I don't think I ever used the word "Nuttyness" :evillol:

Wow. Holy wow. I won't doubt that you make some power there, but... more money than brains. Does each intake charge go to each cylinder or do they all go together to a big intake manifold?

Looking at it again, I'm thinking they're collected...

http://files.automotiveforums.com/gallery/uploads/63107/sandtubing3rv.jpg

If you go to the link there is a large cutout in the firewall, which I assume the intake tubes go into and turn around in to go back to the intake manifold. I can't tell, however, if the intake manifold has each of the 8 intake tubes run separate into each cylinder or if they collect in one big manifold and go back out.

my idea is a remake of the ala kart from amt(the new one) into a track style rod, full carbon body, watanabe wheels and a na 4 cylinder motor with idependant front and rear suspensions...i've got it thought out in my head..all i need to to is build it.

i've had lots of crazy ideas for 37 fords(highboy) 32 fords(highboy too..lol) a 55 chevy truck(would have ended up looking liek the first nomad concept) lots of different nissans, and pro touring muscle cars but my mind thinks things up that my skills were not good enough to try doing..even now my skills suck(cause i've not finished a model in quite a few years) but i'm ready to start trying again.

Eclipse with lambo doors, LED's in headights and tails, underglow and possibly stobse, custome hood, and (I'm sure eveyone remembers last S2000 Spoon) Rear simular to it.

my ideas are:
-1/12 2002 VFR VTEC based on VFR 750 or Honda NR kit from Tamiya (some heavy scratchbuilding required) :screwy:
-"monster miata" with the Ford 5.0 Mustang engine and some large meats.
-converting the Revell Simba firetruck model into a large crane
-widebody MPC Fiero GT with LT-1 or LS-1 turbo motor
-making a twin-engined VW golf V6 turbo
-C1500 dually pro street with tube frame
-converting a Pocher Testarossa into a 512 TR

Converting a RX-7 into a TVR Tuscan...

Check it out.
http://www.lateral-g.net/sandlin/sandtubing.jpg

http://www.lateral-g.net/sandlin/

Cheers!


:eek7:

so it is possable?, i didnt think the fuel system could handle something like that

:eek7:

that thing would be twice as nuts if each cylinder was fed by it own turbo, but its still pretty sick as is...

my craziest idea is to make a sleeper 49 merc slammed, shaved, 2 tone paint integra wheels and a twin turbo dodge viper motor(almost finished)

well the retard i knw wanted one for each cylinder plus then 2 more and then etc etc etc....so inless dsm-mark can pull this out of his well u know then lol ill shut up then

zx youre my hero some people dont get the message but im sure your image will show them exactly what i mean