stock bumper with mesh insert pics

I have the good ole stock bumper and want to insert some mesh in it. Would it look better to put a piece in top and bottom 3 ft wide holes in bumper or cut it out and make one big rectangular hole. Anyone have any pics of this done? I will upload some pics when i get finished with it.
Thanks

I did mine not a good pic but in my AVATAR. Pretty easy just watch what it looks like from the out side and dont cut too much. Also you will need to cut the foam on the sides to make it look right.

i dont understand why dont you just put mesh behind the whole bumper.

Cause you cant see the mesh behind the stock vents.

Cause you cant see the mesh behind the stock vents.

You could always cut away the louvers in the front air-dam...

Yea I was planning on cutting them out, if the two pieces of mesh doesn't look right.

I did that. My louver-thingy got bent hitting a cabinet in the road, so I rigged it with mesh. It may look kind of crappy but it's better than having a big hole there... sorry no pic... embarrassed somewhat :uhoh:

here is my bumper with the mesh
http://files.automotiveforums.com/gallery/showphoto.php?photo=18922&password=&sort=1&cat=503&page=1