Shift Linkage Length Help

I have cut and welded Integra Shift Linkage in my Hatch with my LS Swap.....but it broke already.....Im almost wondering if I cut it too short.....I thought I only took out 2 1/4"......but I may have taken out 3.......either way it worked for 1 trip around the block......and Im a good welder.....so it aint the welds......If someone is able to measure their shiftlinkage I would be very grateful......this way I can trim, or add to mine as neccesary.


Also.....JohnnyM needs a 90-93 Teg shiftlinkage or HCP, Hasport linkage if anyone has any for sale....post here.

Thanks

-Brad

eh ?

just get factory jdm crx, civic 89-91 b16 linkage. bolts right up and no problems. other then that get hcp linkage or another company, cutting and welding doesnt work, and you have already figured that out. any other questions ask.

What I did when I did my B16 swap was, I Cut 8" off the B-series Linkage I got with the swap and welded in a 6" threaded Rod and a nut on each end. using an other nut I can Lock the nuts so they don't move.

this way i can adjust it exactly how it's supose to be.

Kun