(another) gear question
flashstang04
05-28-2004, 11:00 AM
...
flashstang04
05-28-2004, 12:07 PM
...
stang_racer20
05-28-2004, 01:08 PM
I have decided to go with 4.10's on the advisement of all of the fine stangers on the site.
one more question: Except for the speedo, do I need to change the chip for anything.....I think someone had told me that here.
What vehicle? If its newer you program the calibration in correct. On older models you need a new speedo gear to calibrate for the gears.
one more question: Except for the speedo, do I need to change the chip for anything.....I think someone had told me that here.
What vehicle? If its newer you program the calibration in correct. On older models you need a new speedo gear to calibrate for the gears.
flashstang04
05-28-2004, 01:21 PM
What vehicle? If its newer you program the calibration in correct. On older models you need a new speedo gear to calibrate for the gears.
sorry... it's an 04 Gt :loser:
sorry... it's an 04 Gt :loser:
brentmcq
05-28-2004, 02:51 PM
Seems like the going rate. I have shopped prices at 4 shops in Phoenix for 410's and they are in the 600-700 range full install including bearings and seals. If it's just the gears that's too much.
GTStang
05-28-2004, 04:38 PM
Gears+ install average is $500 so use that as your ballpark.
on an 04 GT your speedo needs to be fixed electronically not with a speedo gear.
If your getting a chip you can correct the speedo through the chip and don't need the speedcal.
on an 04 GT your speedo needs to be fixed electronically not with a speedo gear.
If your getting a chip you can correct the speedo through the chip and don't need the speedcal.
Automotive Network, Inc., Copyright ©2025
