door prob.

I was told in order to rebuild my door hinges I have to cut the original ones out. It looks like that might be possible, but there has to be a nother way to do this.

parts stores have a "HELP" section with everything from window winders to exhaust flange springs.
they sell replacement door pins and bushings, takes about an hour to fix

Well i need to know if i have to cut out the old door pins in order to put the new door pins and bushings

I can figure out how to do it, but at the top of the pins there is a strip that holds it in and napa told me that i would have to cut it

Do you want to put new Hinges in? or replace the pin and bushings?

There should be a metal c-clip type of thing at the bottem of the pin that can be pulled off.. Then you pull the pin out and the bushings will fall out..
Good to have a buddy hold the door, or find something to hold the door up

Hay we are talking 1971 camaro
I was told that they had to be cut out do they

all check, but if i remember right there is a head on the bottom and a notch at the top but the bottom could be a c clip all take a look again