91 crx si trans mount to a d16z6

I am about to begin the swap, but I ran into yet another problem and no I finally figured out the wiring. I was talking to the guy I got the motor from on the phone and he said my stock 91 CRX Si D16A6 Manual Tanny will not fit the d16a6 motor. He also said my Intake Manifold/Exhaust Manifolds will not fit either?

well that sucks

Okay, I got the specs from him. He said that the TB, Intake Mani/Exhaust Mani are all 1mm bigger than the Si. And I found out that my transmission will bolt on. And that I won't be able to advance or retard the timing if I use my stock dizzy from the A6. Which is okay.

you can use your intake and exhaust manifolds on the Z6, but I would recomend using the z6 pieces with your sensors, they flow better.

-Dustin