5-speed help

i just recently purchased a'96 s-10 .it has a2.2 4cyl.and a5-speed.the truck sat in a field for more than 2 years over a cracked head.i got the truck cheap and its in really good condition.i took a head off a 96 cavalier,that fixed that.now,the truck has been back on the road for about a month .one morning i started it and there was a loud rattle noise comming from the tranny.now a couple days later it goes into gear fine but the clutch pedal feels like its sticking just a little bit and theres aslight grinding noise.is this the throw-out bearing going bad?the truck only has 110,000 miles . wheres a cheap place for a clutch kit? thanks for the help.

yes could be the throwout bearing or pilot bearing, but more than likely throwout, clutch kit costs about 100 bucks at advanced