Please Help !!!

I have a 89 Camro 5.0 5- speed and my clutch is slipping at around 3500 rpm.I replaced the cluch pressure plate and throw out bearing about 15000 miles ago. It has a hydraulic clutch, can somone tell me how to adjust it or does it need to be replaced again............

Thanks for the help !!

it may very well need a new one, depends on how you drive it.

it may very well need a new one, depends on how you drive it.
Thanks for the reply !!

There is a adjustment on where the linkage conects to the pedal. it is a long threded bolt the conects to the fork. There should be a nut some were on it and that is were u adjust it. Be caareful check the stiffness of the pedal as u adjust it slowly. I would recomned having 2 people to do this. That way one person can adjust and u can test the pedal and tell them when to stop. I don't know u might have to put a new one in. Have a mechanic drive it and let u know what they think. also is their any noise caming from u clutch at all?

There is a adjustment on where the linkage conects to the pedal. it is a long threded bolt the conects to the fork. There should be a nut some were on it and that is were u adjust it. Be caareful check the stiffness of the pedal as u adjust it slowly. I would recomned having 2 people to do this. That way one person can adjust and u can test the pedal and tell them when to stop. I don't know u might have to put a new one in. Have a mechanic drive it and let u know what they think. also is their any noise caming from u clutch at all?


No, ther is no noise comming from it. All I hear is the revs from the rpms when the clutch slips...........Thanks for the reply