Help Asap

I have a 1993 chevy lumina it is stalling and in drive and trying to die in while driving down the road. It is acting just like the fuel filter is clogged so I changed it sill didnt fix the problem. I thought ok maybe its the crank sensor so I changed it still didnt fix the problem. So I tried going in reverse drives great just when I put it in drive it dies. I dont get it. In park, neutral, and reverse everything is good to go. just drive messes up. So I figured maybe cpu changed it still didnt fix the problem. Please I need some help. Thankyou Feel free to page me if you want Ill call you back.
http://www.metrocall.com/mcll/
go to send messege enter #361-744-2480
thankyou

still needing help

does it try to die at 45mph and higher? low speed or while applying the brakes?

all of the above but it drives great in reverse. every one says tcc I just cant find it

There should be a plug on the transmission just to the drivers side of the engine should have 3 or 4 wires going to it, one wire will be tan with a black stripe. Once you unplug the connector it should be fine. Check the RPO codes in your glove box for M13, MH1, ME9, or MD8. I don't know if a 93 Lumina would have an M13 but if it does, it will be a different procedure to fix

thankyou still looking cant find it you couldnt by chance send a pic? [email protected]

If its going fine in reverse, I dont think its TCC... when I had the TCC problem, Drive or Reverse would instantly stall the car until it cooled.

check the vacuum line to your transaxle

Thankyou Ill look for the vac. Here is one for you I disconected the speed sensor car runs fine what is in the circuit for the speed sensor does any one know...

???