89 Integra MPFI Swap

HI,
Can you use the 89 Integra intake (the whole thing from top to bottom) from a DOHC to do a MPFI to DPFI swap on a 1.5 SOHC?

Also could you use all the wires and resistor box as well?

How about the Distrubritor?

I have a teg ECU from it already.

I did SEARCH but could not find a definitive answer..


THANKX,
244

you can use the injectors, injector plugs, ECU, and resistor box. this is all.

Heys,
Thank you for the help, one more quick question, can you use a Civic Intake Manifold JDM 88-91 Si ZC?

Thankx,
244

i believe you can, cause the ZC is a D-series motor

You can use the SOHC ZC Intake manifold but NOT the DOHC one. You can also use the intake manifold from a 88-91 Civic D16a6, in which I do have for sale right now.

there are many sites out ther that tell you what u need but basicly u can use...

Si distro 88-91
Si ecu 88-91
Si intake 88-91 (sohc ZC will work)
Si resisot box 88-91
any honda resistor box will work
and some misc ecu wires and some other misc wires for the ecu and injectors and a GUIDE off a webiste it is very strait foward and easy i do have some of the parts u need for same in the classifieds

You can use the SOHC ZC Intake manifold but NOT the DOHC one. You can also use the intake manifold from a 88-91 Civic D16a6, in which I do have for sale right now.


Hey T-MO,
I did PM you awhile back you responded to my first PM but not my second...


244

my bad I didn't see it. I have replied now

remember

Almost all the time
DOHC bolts onto DOHC
and
SOHC bolts onto SOHC.

and

Engine series dont mix:
ex:
dseries on d series
bseries on bseries
fseries on fseries
kseries on k series

You get the point. May parts can be mixed though.