wiring harness schematic

I just got the engine installed in my 95,(the engine is from a 98) and I was plugging in the wiring harness and I figured out where everything went except for one plug. I cant figure out where it connects to. I did a search to find a schematic for the harness but I couldnt find one, so if anyone knows where I can find one, please let me know. Thanks in advance.

i'm guessing its the CAS on the head... where is it at... take a pic or somthing!

its not the cas I have that plugged in, ( i had to swap the 95 cas onto the 98 block) but it is on the same side as the 98 cas is though. If I dont figure it out tonight I will take some pics (at school right now :()

is everything on the intake manifold plugged in... how about the knock sensor!!! long wire coming out of the middle of the block in the back!

yea that is plugged in also. I noticed just know that I left another plug unconnected. It is black and skinny it is on the driver side of the intake manifold. Any idea what that is for? I have been looking the harness over because I went to start the car and my starter wont turn, when you turn the key there is a humming like noise from under the hood, that is all. So i have been trying to figure out why it wont start. Thanks for any help.

take pictures! then i will be more help... sorry!

yea..sorry about that, I will try to get some soon.

is there anything besides the power and ground that has to be hooked to the starter to make it engage. I have the alternator off, does it have to be hooked up for the starter to engage?

yes you need the alternator on with the wires hooked up i believe!