turn signals inop

whats going on gm fans, ive got a prob with my 96 grand am. i finally got my head job done and ive got her running good, now i cant get my turn signals or hazards to work. ive checked the fuses , all good, and have been trying to locate the flasher but i cant seem to figure it out. i remember it being clipped to something, but am not finding anything. i found two possible relays that could be them, but im not sure. is the flasher on a connector with similar "flashers/ relays? ive considered that it could be the multifunction switch also but cant remember the diagnostic steps. any assistance is appreciated.

anyone?

The only thing I would check is the flasher fuse (typically a cylindrical fuse, maybe 1 inch diameter, 3/4 inch tall). that is the only thing that I know of that would cause none of your turn signals to work. unless of course, all your turn signal bulbs are burned out :lol:

that would suck, huh, i was wondering if there is a service manual online somewhere, any clues? also my relay is square but im not sure if ive found it or not. id really like some wiring diagrams....

you may have to invest it a service manual from an auto parts store....i dont know of any free-access ones online. the flasher fuse should have 2 prongs on it, at 90 degrees to each other. if you think its that square one, pull it out and see if, when you put a new one in there, they work. worth a shot

thanks for the suggestions yall, i got it figured out.....was the relay, and for future reference, there is a white block under the guages that has a single flasher in it for both the hazards and turn sigs. thanks yall