b16a, still not working

I just put a PR3 b16a in a 91 civic, I had 2 codes that wouldn't go away and all signs pointed to the computer. I got a different computer for it from a friend with the same motor and when we tried it, it didn't flash any codes but the light was solid and stayed on. It ran allright with the original computer but with the other one it would idle but had trouble reving past 3000rpms. Any suggestions?

running on four cylinders, what codes, timing, checked all of that?

http://www.automotiveforums.com/vbulletin/showthread.php?t=224606

PR3 is OBD-0, correct?

PR3 is OBD-0, correct?

I believe so

yeah, it is

It is. Check the codes and see whats wrong with it and keep us updated on what goes on.

on the original computer it gave us IAT sensor, and IACV, but the car ran okay, just poor throttle response and it would cut when it approached redline. We replaced the IAT sensor cause the probe was all burnt, but we were still getting that code. We borrowed a computer off somebody yesterday, and it started but it would only idle, any touch of the throttle and it just chokes itself out.

Disregard the first post, my brother wrote that but im taking over now

http://www.automotiveforums.com/vbulletin/showthread.php?t=224606

put in old ECM, check codes, click link, click link in it, click number corresponding to code, read, profit.

i need help i put a 1.6 16v dohc in my rover coupe an its comin with code 4 witch is the tdc sensor the need to the coulors of the wirings an what pins they go 2 on the ecu

Im just waiting to get my computer back from the guy that was gonna test it for me. I think those charts will give some insight.
thanks