Installing exhaust and headers..

i was wondering if it is hard to install an Apexi ni cat-back onto a 96 240sx. does it fit right into the stock brackets and all? and does the motor have to be taken out to put in aftermarket headers? thanks for the help.

i doubt u need to take the motor out :-\

i doubt u need to take the motor out :-\

yeah jeez what does this look like the 3000GT forum :grinno:

it probably fits onto all the stock brackets. make sure you let it cool down before you do it, and spraying the bolts with a ton of WD40 doesnt hurt.

i just installed my n1 duals today, was a breeze but helps if you have an extra set of hands because they are kinda heavy ... and yeah tons of wd40...

check my pics and audio clips if you want

http://www.240sxforums.com/forums/showthread.php?p=322649#post322649

i just installed my n1 duals today, was a breeze but helps if you have an extra set of hands because they are kinda heavy ... and yeah tons of wd40...

check my pics and audio clips if you want

http://www.240sxforums.com/forums/showthread.php?p=322649#post322649


yeah thanks man that answered my question. its gonna be me and a friend anyway.

The headers will probably be a little tough, mine were on my s13, but it is all straight forward. Exhaust took me 20 minutes by myself. Apexi N1. Buy a small can of Kano Kroil. That stuff is amazing on tough bolts, especially the exhaust studs on the head and exhaust flange bolts.

Where do you live? I put my HKS exhaust on a few weeks ago. I ended up having to take the whole exhaust off at the header and cut the old, rusted bolts off with a die grinder. Then I had to redrill the flanges and put new bolts in. If the nuts aren't rusted to the flange, it should be smooth sailing though.