5th gen b16A

i was planning on putting a 92-95 b16a motor in my civic and i was wondering if i was to buy parts for this motor (pistons, turbo, pulleys, etc...) do i have to buy the parts that are made for the 6th gen b16a or do i have to get these things custom made. i'm guessing that the motors are identical and whatever fits in the 6th gen will fit in the 5th gen

aslo is the the transmission on the 5th gen b16a hydraulic or cable and will i need to do the hydraulic cable conversion or vice versa.

Its a hydrolic clutch.
and yes you can use pistons etc from any other B16a engine. So you can put USDM pistons in a JDM engine. The only thing to watch out for is the USDM B16a's run a slitghtly lower compresion ratio to the JDM ones.
But things like pullys, plugs, leads, cap etc are all the same.

how about on the civic itself is it hydraulic or cable that comes stock with the car

Originally posted by 94civic
how about on the civic itself is it hydraulic or cable that comes stock with the car

the 92 up civics use the hydrolic trans

re: the question - turbo exhaust manifolds and forged turbo pistons are the same across all B16As. Likewise forged conrods etc.