something weird again

dammit it seems like I fix a problem and the next day another one appears :banghead:. so today I was out driving and it felt like the clutch was slipping, except I got the clutch replaced less than a month ago. and it only happens when I floor it, at about 1/2 throttle the car acclerates faster than before I put the 300z tt fuel pump in. so is the fuel pump pushing too much gas into the engine casuing it to flood(kinda)? I've checked the air filter and it's clean(foam kinda tore on one side). any advice will be very appericated.

dammit it seems like I fix a problem and the next day another one appears :banghead:. so today I was out driving and it felt like the clutch was slipping, except I got the clutch replaced less than a month ago. and it only happens when I floor it, at about 1/2 throttle the car acclerates faster than before I put the 300z tt fuel pump in. so is the fuel pump pushing too much gas into the engine casuing it to flood(kinda)? I've checked the air filter and it's clean(foam kinda tore on one side). any advice will be very appericated.


did u get the clutch bled, and did u get it bled properly, check ur master and slave cylinder

if it wasnt bled properly, it would have air bubbles, and when a bubble goes into the master or slave cylander, the clutch will stick. i dont think thats your problem.i dont think the fuel filter is the problem either. id try plugs and wires, distributer cap and rotor. cheap, and usually fixes the hesitation problems

how exeactly do you check the slave/master cylinder? I can see the clutch cable and it moves back and forth fine. yea I was gonna get new plugs/wires the distributer is fine I checked it today.

and the shop I took it to has a good reputation, they have never messed up any of my other vehicles.
The only reason I took it to the shop was becasue at the time all my tools were packed and didn't have time between school and work.

do you have a hydrolic clutch or cable clutch? yeah, plugs and wires are a good thing. probably need replacing anyway. good luck on fixing this, ive reached the end of my knowledge on this problem