Quad driver code and flashing lights

I have a 1992 Grand Am SE with a 3.3L in it. When I let the car idle to warm up the CEL goes on but then when I start driving it will go out. I checked the code and it gives me a Code 26 (quad driver module). I have talked to a few people about this but no one has info. The other problem that I am having is that for some unknown reason and at anytime that they want to....... my "check oil" and "check gagues" lights go on together at the same time and shut off together at the same time. Would this have something to do with the Quad Driver Module fault code??? And for all of the people that like to try to state the obvious...... YES MY OIL IS UP TO LEVEL! Any help on this prob will be greatly appreciated.


Thanks,
Jeremy

my son has a 92 grand am gt and we just did some work to it, it also had the code for the quad driver module. You can have this part tested at a mechanic. If you dont know its the main board under the caps where the spark plug wires go to. Our sons car also had the oil and check engine lights come on. Oh btw our sons QDM was bad, it was only sparking on 4 of the 6 posts, we replaced it, $150 and his car starts right up.

Anyone else that might be of assistance on this one?