Cyl Manifold sequence/Trq

exectly what it say's need sequence/trq for d15b7 cyl head.

www.helminc.com

oh wow, didnt know it was ganna cost me $30, i was doing some research at home so i dont have to spend the time looking it up on all-data at school

Actually the manual you need is the $65 Service manual. But anyway just start at the middle tighten then halfway then once you have them all in, tighted them down all the way working from inside out.

there are 8, 1.25mm bolts to be torqued at 17 lb-ft