Silverbolt...
mAtC
01-11-2002, 01:20 AM
I wanted to know how you dyed your dash - did you just mask the whole interior up? Or did you take it apart and then paint it outside the cab?
I'm trying to remove the upper vinyl dash and I figured you had the experience of possibly removing this portion. If so, are they clips/screws? Their location?
thanks for the info ...
I'm trying to remove the upper vinyl dash and I figured you had the experience of possibly removing this portion. If so, are they clips/screws? Their location?
thanks for the info ...
markpa
01-11-2002, 12:19 PM
That looks tight guy!!!
xivera
01-11-2002, 08:02 PM
I think it was all painted for that show...
sparq
01-11-2002, 09:01 PM
Originally posted by xivera
I think it was all painted for that show...
Ummmm, I was always under the impression that he had his whole dash wrapped in material and it wasnt painted? :confused: :confused: :confused:
I think it was all painted for that show...
Ummmm, I was always under the impression that he had his whole dash wrapped in material and it wasnt painted? :confused: :confused: :confused:
xivera
01-11-2002, 09:14 PM
SilverY2KCivic
01-11-2002, 11:22 PM
His interior has been painted like that for a while now! The last time I saw him after the Speedzone show those pics were taken at, his car was still the same inside. He might have changed it since, but something tells me he didn't. I last saw hime a couple months ago.
xivera
01-12-2002, 05:45 PM
Well...
I remember he was looking for a new steering wheel... and a better strut bar.
I remember he was looking for a new steering wheel... and a better strut bar.
Silverbolt
01-13-2002, 03:00 AM
Originally posted by SilverY2KCivic
His interior has been painted like that for a while now! The last time I saw him after the Speedzone show those pics were taken at, his car was still the same inside. He might have changed it since, but something tells me he didn't. I last saw hime a couple months ago.
Yup, you know me too well :) Havent done much at all. All I've added since that show was some simple graphics, and carbon fiber front air diffusors/splitters. And yeah, I got myself a new strut tower bar. When I was gonna get my motor swap (which I ended up not doing.. long story) I had to loose my Nuespeed four point cuz it wouldnt fit on a DOHC. I figured if I was gonna get a new bar, it would have to be at the same "level" or better. I'm not about to downgrade. So I figured the only way to go is MUGEN!!! :D And GODAM does it really make a difference over the Nuespeed! My rear gives away before my front now! I got the 2nd gen design. As for the stearing wheel... I'd only get Mugen now :) only problem is I just quit my job and am jobless at the time... AGAIN!!! :( So spending money on my car is gonna pretty much stop.. especially since my GF is taking it all haha :)
His interior has been painted like that for a while now! The last time I saw him after the Speedzone show those pics were taken at, his car was still the same inside. He might have changed it since, but something tells me he didn't. I last saw hime a couple months ago.
Yup, you know me too well :) Havent done much at all. All I've added since that show was some simple graphics, and carbon fiber front air diffusors/splitters. And yeah, I got myself a new strut tower bar. When I was gonna get my motor swap (which I ended up not doing.. long story) I had to loose my Nuespeed four point cuz it wouldnt fit on a DOHC. I figured if I was gonna get a new bar, it would have to be at the same "level" or better. I'm not about to downgrade. So I figured the only way to go is MUGEN!!! :D And GODAM does it really make a difference over the Nuespeed! My rear gives away before my front now! I got the 2nd gen design. As for the stearing wheel... I'd only get Mugen now :) only problem is I just quit my job and am jobless at the time... AGAIN!!! :( So spending money on my car is gonna pretty much stop.. especially since my GF is taking it all haha :)
Silverbolt
01-13-2002, 03:04 AM
oh sorry, forgot to answer the question that started this whole thing! HAHA Yeah, the entire upper dash is the hardest thing to remove. I havent removed mine, and not too sure how to. Mine actually is stock and hasnt been change. I was gonna wrap it, but thats been done to death. I might fiberglass mine, or wrap mine done in carbon fiber, but that'll hafta wait till I get a new job.
changedagame108
01-13-2002, 02:54 PM
Sweet interior you got there silverbolt!
SilverY2KCivic
01-13-2002, 08:07 PM
Originally posted by Silverbolt
Yup, you know me too well :) Havent done much at all. All I've added since that show was some simple graphics, and carbon fiber front air diffusors/splitters. And yeah, I got myself a new strut tower bar. When I was gonna get my motor swap (which I ended up not doing.. long story) I had to loose my Nuespeed four point cuz it wouldnt fit on a DOHC. I figured if I was gonna get a new bar, it would have to be at the same "level" or better. I'm not about to downgrade. So I figured the only way to go is MUGEN!!! :D And GODAM does it really make a difference over the Nuespeed! My rear gives away before my front now! I got the 2nd gen design. As for the stearing wheel... I'd only get Mugen now :) only problem is I just quit my job and am jobless at the time... AGAIN!!! :( So spending money on my car is gonna pretty much stop.. especially since my GF is taking it all haha :)
No way! Say it isn't so about your job... :(
What did you end up doing with your Neuspeed bar? I'm still looking for one, and that's the only bar that will clear my intake pipe. ;) So if you still have it, I might be interested in it, let me know, also since your's is polished, and not black, it would more fit the look I want under my hood. :)
Yup, you know me too well :) Havent done much at all. All I've added since that show was some simple graphics, and carbon fiber front air diffusors/splitters. And yeah, I got myself a new strut tower bar. When I was gonna get my motor swap (which I ended up not doing.. long story) I had to loose my Nuespeed four point cuz it wouldnt fit on a DOHC. I figured if I was gonna get a new bar, it would have to be at the same "level" or better. I'm not about to downgrade. So I figured the only way to go is MUGEN!!! :D And GODAM does it really make a difference over the Nuespeed! My rear gives away before my front now! I got the 2nd gen design. As for the stearing wheel... I'd only get Mugen now :) only problem is I just quit my job and am jobless at the time... AGAIN!!! :( So spending money on my car is gonna pretty much stop.. especially since my GF is taking it all haha :)
No way! Say it isn't so about your job... :(
What did you end up doing with your Neuspeed bar? I'm still looking for one, and that's the only bar that will clear my intake pipe. ;) So if you still have it, I might be interested in it, let me know, also since your's is polished, and not black, it would more fit the look I want under my hood. :)
Silverbolt
01-14-2002, 01:25 AM
Yeah, I'm not working there any more. And the Nuespeed bar. If you want it, its yours. Its pretty much just like new. I wasnt even thinking of selling it though, but lets try and work something out. Whats the best price you've seen for the bar?
Silverbolt
01-14-2002, 01:26 AM
Originally posted by changedagame108
Sweet interior you got there silverbolt!
Thanks! :) And shes daily driven too! Not no trailor whore! haha
Sweet interior you got there silverbolt!
Thanks! :) And shes daily driven too! Not no trailor whore! haha
mAtC
01-14-2002, 10:56 PM
I appreciate the feedback Silverbolt.
I just finished painting some of my panels and I'll post some pics.
I just finished painting some of my panels and I'll post some pics.
Silverbolt
01-15-2002, 04:17 AM
You're very welcome! :)
Automotive Network, Inc., Copyright ©2026
