91' Dash Replacing Stereo

I know i'm very curious, maybe too much for my own good, but I was wondering if anyone also knew how to access the in dash stereo if one would want to replace it, and maybe some suggestions on what kind of receiver to put in (or just dimensions of what would fit)?

4 screws holding that center piece in place, and then, the p10 uses ISO DIN slots, so just unscrew the stereo (2 on the left, 2 on the right), and when you get your new head unit, just screw the brackets on the holes in the side of the new head unit, and it will bolt right in...

I like kenwood alot, and pioneer is pretty good too, like deh-p9300.

Could you tell me the dimension requirements I would need to meet for the receiver to fit in there?

any single DIN sized head unit would fit I guess.

From my *small* understanding of new non-stock head units, there are definately different sized DIN's in terms of depth that may make a difference....

My suggestion is to head on over to Crutchfield (http://www.crutchfield.com) and enter your car for a list of new receivers/headunits that will be compatible with your car! :D

yes, in terms of depth, but the G20 isn't lacking in depth. most single din head unit will fit. There will be enough room back there for any head unit