where to find cheap MAF
PureSXyness
04-05-2004, 01:42 AM
anyone know where i can get a MAF sensor for a 96 240sx for under $250?
SchmoreGalore
04-05-2004, 02:02 AM
Try your local salvage yards or ebay
J_Spec_NiTeMaRe
04-06-2004, 01:31 AM
I have one from a S13 SR20, I'm pretty sure it can be made to work. It's used, I'll sell it to ya for $50 :biggrin:
PureSXyness
04-06-2004, 04:50 PM
hmm, i need something that'll work for sure
cuz my unreliable 240 isn't cool
cuz my unreliable 240 isn't cool
FDTT
04-06-2004, 04:53 PM
Junckyard
PureSXyness
04-06-2004, 06:34 PM
i'll just get it from the dealer
anyone know where to get step by step instructions on installing the MAF? if so, please post them
anyone know where to get step by step instructions on installing the MAF? if so, please post them
PureSXyness
04-07-2004, 06:43 PM
fuck the dealer!!! $513 for a MAF!!
jspec, do you think the maf from the s13 sr20 will work for the s14?
in fact, does it STILL work (no problems)?
jspec, do you think the maf from the s13 sr20 will work for the s14?
in fact, does it STILL work (no problems)?
J_Spec_NiTeMaRe
04-07-2004, 07:23 PM
Bwahahaha $513?! The SR20 MAF is the same as the KA24E MAF, so that's why I got it. I tested it in my car and it works, but I figured out that my MAF wiring was messed up, not my MAF.
According to JWT, all MAFs from KAs were identical. Just to make sure, take off the connector and see if it is: 3 pins, each leading to a wire, 1 Black, 1 White, 1 White/Black. Or anyone else with a S14 can verify this... If not, it's just a matter of splicing them in right (12volt, ground, 0-5v signal out).
In any case, the MAF is the metal piece that mates your air filter to the rest of your intake. It has a clip going into it. It's easy to get out and replace, just 4 screws and that clip going to the sensor if I remember right.
According to JWT, all MAFs from KAs were identical. Just to make sure, take off the connector and see if it is: 3 pins, each leading to a wire, 1 Black, 1 White, 1 White/Black. Or anyone else with a S14 can verify this... If not, it's just a matter of splicing them in right (12volt, ground, 0-5v signal out).
In any case, the MAF is the metal piece that mates your air filter to the rest of your intake. It has a clip going into it. It's easy to get out and replace, just 4 screws and that clip going to the sensor if I remember right.
nissanfanatic
04-07-2004, 07:33 PM
Autozone sold me mine for $265. It is a python injection one. Works fine.
PureSXyness
04-07-2004, 09:12 PM
$50? SOLD!
how do i get it?
how do i get it?
J_Spec_NiTeMaRe
04-07-2004, 11:28 PM
You got a paypal account? email me at [email protected].
Automotive Network, Inc., Copyright ©2026
