Turbo help

I wandering if anyone would know wear I could get some custom made piping for the turbo. And what kind of piping should I use.

Piping for the turbo? Do you mean for the exhaust? or a manifold?

ya, like there are a lot of pipes associated with a turbo...

If you're talking about intercooler pipes (compressor outlet through intercooler to the throttle body) then yes, you could have a shop make them. Use mandrel bends. You might also order the bends from jcwhitney.com and weld it up yourself.

I'd rather buy dejon tool pipes, though.

Sorry that I wasn’t specific enough but yea I need the intercooler pipes (compressor outlet through intercooler to the throttle body) should I go to any shop or something like a muffler shop and how much do u think I should pay for all that. And yes I need a custom manifold too, wear could I get that made and how much u think I should pay. One more thing I plan on upgrading the fuel injection and fuel pump anything ales that I should upgrade. It’s a 97 GS motor.

First, what setup do you have that runs a turbo and intercooler on a GS?

for the fuel managment sys. get bigger injectors like 450cc+ upgraded fuel pump 255lb/flow and a better fuel pressure regulator, also look into a air fuel tuning cpu, like a s-afc or some thing to that extent,
1