little problem...
dupeto_e
03-29-2004, 08:50 PM
i'm swapin a 6 blt into 95gst.i just got the block and head together along with the ...everything without the exsaust and turbo.i,m doing it by magnus motorsports progect.according to them u have to use the 1g water pipe and 1g thermostat housing/water neck.well i didnt put a 1g pipe and neck because my 2nd gens mached fine(i tought that useing the 1g water pump would make a difference,it doesnt).but here i got stuck again.on the 2g block there is an outlet right below the first proteckting cup(i'm talking about that cup that preven your engin from cracking the block if the water freezes).however that outlet supplys water to your turbo,cooling it up,and that outlet does not ecsist on the 1g engine block.my question is can i put a "T" fitting kind of at one of the other water lines so i got one extra to supply the turbo need of it,since the original is now missing on the 1g block.thanks y'all
p.p.beside that dont forget to get yourself 1g head bolts too,altough the 2g are so thin.i would hate if i need to change the water pipe and neck.too much oney alreadyand honestly i dont see the reason why for right now...
p.p.beside that dont forget to get yourself 1g head bolts too,altough the 2g are so thin.i would hate if i need to change the water pipe and neck.too much oney alreadyand honestly i dont see the reason why for right now...
TurbosR4me
03-30-2004, 08:19 PM
I have no idea, but make a more specific thread name. People will be more likely to answer.
dupeto_e
03-31-2004, 12:50 AM
what more specific.like that your turbo is water cooled and has 2 water lines,one does to water pipe the other one "bolts" to engine block.well now on the 1g engine shortblock that hole for bolting the turbo water pipe is just missing.1st gen turbo is cooling a little different.now i got to get water to cool my turbo and connect the 2nd line which no longer would be able to connect to block.now i was thinking...that is a 3/8 od size.if i get a "T" looking plumbers size 3/8 od(which is the same) from home depot,disconect some other water pipe and conect it with that "T" adaptor,lets say the pipe that goes trough the firewall,i'm going to have an extra supply line from the "T" adaptor(fitting 3/8").so there i'm goin to conect the lonely turbo water pipe.got it.if u got 95+ eclipse with 4g63 just look at where your upper water turbo pipe is conected for the block.i,m missin it.figure out what i,m asking.
if now u dont get it pls accept my apology...
thanks
if now u dont get it pls accept my apology...
thanks
real_madridcf
03-31-2004, 10:22 AM
whoa, slow down man. TurbosR4me just recommended to make the thread name more specific, and hes right. If you at least make a little more specific, becuase the thread says 'little problem...', no one knows if you have a little problem w/ putting the key in the key slot or a problem w/ your turbo, or whatever the case may be.
dupeto_e
03-31-2004, 09:36 PM
dude,i asked a QUESTION!!!
i did not ask for advice of what tread name to put on.obviously somebody is reading it.if you are out here often i'm sure u would read most of the treads,doesn't mether what the name it has.its ALL good to read and learn.at least i do.
bottom line:question not ansuered.
next time when u dont know the ansuer,do not bother givin advices about some tread names-nobady cares.
desolve the problem myself.thanks alot
i did not ask for advice of what tread name to put on.obviously somebody is reading it.if you are out here often i'm sure u would read most of the treads,doesn't mether what the name it has.its ALL good to read and learn.at least i do.
bottom line:question not ansuered.
next time when u dont know the ansuer,do not bother givin advices about some tread names-nobady cares.
desolve the problem myself.thanks alot
BoostedSpyder
03-31-2004, 10:31 PM
dude, try using the SPACE BAR!!!
my eyes hurt just going thru half of your nonsense... try using proper grammer too, you can barely read and understand that shit...
my eyes hurt just going thru half of your nonsense... try using proper grammer too, you can barely read and understand that shit...
TurbosR4me
04-01-2004, 01:13 AM
Peeps tryin to help you out, and u blow up. Good way to lose peoples ideas and help...
youngmanvr4
04-01-2004, 02:23 AM
Dude...dont blow up at us.You've been on this site for 12 days now.Try to take tips.They help.I was a newbie at one time too.I haven't been on this site that long.But please...try not to get up set.We are just trying to help you out.
dupeto_e
04-01-2004, 11:11 AM
sorry guys,but i dont realy blow up.there is just no answer for what i asked.why do u people even waste time wrightening that.as far as my grammer,my appology but english is the 3 language i speak and i think i'm doeing pretty well.how meny do u speak?like i sad i'm not blowin it up,just agrovating when u seek for an answer and there is somebody telling u what tread name to put on,or that my grammer is not proper...i dont think that is why we are here.if u guys dont anderstand what i'm asking just pass it - big deal.
again i'm not blowin it up,i had questions before and people helped me ,which i'm thanksfull for,but on this one there is still NO ANSWER.
sorry for grammer again
again i'm not blowin it up,i had questions before and people helped me ,which i'm thanksfull for,but on this one there is still NO ANSWER.
sorry for grammer again
metalhedskater
04-01-2004, 12:26 PM
"I have no idea, but make a more specific thread name. People will be more likely to answer."
Dude was trying to help you get more answers....he was not trying to be a dick....apology accepted
Dude was trying to help you get more answers....he was not trying to be a dick....apology accepted
real_madridcf
04-01-2004, 02:04 PM
Were just trying to help. I think it would be wise to learn from others advise. Just a recommendation from another Newbie.
Automotive Network, Inc., Copyright ©2025