Help Plz.

:screwy: Allright ive got a 95 Integra LS. I just got it about...2/3 weeks ago. The passengers side axle went to shit, there was no wheel well, so it got destroyed. When this happened i noticed the car wouldnt go into gear :eek7: So i replaced that axle. It worked fine for about 2 days. It started agian not going into gear, sometimes it does go into gear but then sometimes it wont. I popped the hood open check the fluids. The clutch fluid is like poopie brown or black. It looks like theres oil in there..as well as were the anti-freeze goes theres some oil in there also. So i bled the clutch line and put some dot3 brake fluid in. and it worked. now im back to not working :lol2: Anyone have any ideas to what the problem is? Thanks :grinno:

:banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: nobody?

when is the last time you changed you clutch?

your car will run right? just wont go into gear

are you new at driving a stick?

when is the last time you changed you clutch?

the car has the stock clutch, its got now alitte over 124,000 miles on it

Yes the car runs, i can get it into gear sometimes, but the sometimes it wont budge.

And you have a civic so dont talk. :) no im not new to driving stick

change the clutch, pressure plate, throwout bearing and resurface the flywheel at a machine shop. you can grab a kit off of ebay for around 250 if you want all the components to replace you clutch. change your clutch!!!

change the clutch, pressure plate, throwout bearing and resurface the flywheel at a machine shop. you can grab a kit off of ebay for around 250 if you want all the components to replace you clutch. change your clutch!!!


you sure it would be the clutch?

only other thing would be your gears but i highly doubt it