Field VTEC Controller

My buddy just bought a 99 civic with a h22a engine swap in it and a field vtec controller, We are in the process of hooking up a Zex nitrous kit we have to hook up to the 5 volt tps output wire but there is no reference voltage 5 volt so that means there is no output voltage. Iam looking for a wiring diagram for the vtec contoller as i am assuming that it is causing the no reference voltage(i could be wrong though) Any help would be appreciated.


thanks Greg

I would try emailing one of the companies Tech's dept. on this one, if you have not already...

This is all I was really able to find online about (haven't looked for info in about a year for it though); but I hope this helps a little: http://www.vtec.net/articles/view-article?article_id=3053

This is all I was really able to find online about (haven't looked for info in about a year for it though); but I hope this helps a little: http://www.vtec.net/articles/view-article?article_id=3053


I need a softcopy English Manual for the Field Hyper R PLEASE!!! anyone HELP!!!!

Thanks for the info so far guys, i still would like to know what each wire from the vtec is supposed to go to. Like such and such wire ties into your tps output voltage wire,...etc. Any more help would be appreciated