Too close or too far away??
Bboss
03-16-2004, 08:18 PM
After suffering a mild case of orange peel, did a search and also looked through the FAQ, for its likely cause. The consensus seems split - i was either too far away or too close.
Model is 1/43rd resin - scrubbed meticulously, sanded etc. Model and spray (Halfords grey primer for plastics) were both warmed well. Can was shaken vigourously for a good 5 mins Mist coat put down first. I think I did everthing right. But I stll got orange peel.
Whats the feeling - too close or not close enough.
Model is 1/43rd resin - scrubbed meticulously, sanded etc. Model and spray (Halfords grey primer for plastics) were both warmed well. Can was shaken vigourously for a good 5 mins Mist coat put down first. I think I did everthing right. But I stll got orange peel.
Whats the feeling - too close or not close enough.
dag65
03-16-2004, 08:57 PM
LOL I just responded to your post on the SA forum!
Dag
Dag
nis.k.a.
03-16-2004, 10:08 PM
Too far away. If you were the proper distance you might have sprayed too fast.
Most likely you were too far away.
Most likely you were too far away.
Automotive Network, Inc., Copyright ©2025