DiY "Hyper Ground" system

Have any instructions on how to make your own ground wire system for the integra, and where the exact spots to put them? i really don't want to spend 100 bucks for the suns automotive system, but if i can make it i'll might buy it.

i went to radio shack and the thickest wires were 8 gauge, is that okay or where do i find 4 gauge?

They do improve your car if you have better ground,(i did research) the stock car is ok, but you can improve the grounding of the engine better.

I have been thinking about this for a while. I am makin a 8ga kit w/ 1.5 ft long w/ gold connectiors. Got materials for 40 bux and made 1.3 hp in top end

hmm... let me know how it goes, i'm thinking to start my own too, so let me know any tips.

which parts did you ground?

okay i went to Home Depot

4ft. of 8 gauge
3ft of 4 gauge wires.
some terminals for the price total 13 bucks.

I have finished constructing one 4 awg, and three 8 awg ground wires.

i just put in 4 gauge of wire on the valve cover to the chassis, leaving the stock one too. so there are two ground points on the cover.

so far that's the only one i put on, notice no change in power, but i think my radio sounds cleaner, but it could be my imagination.

I'll install 3 more wires whenever i can, but i just don't know where to put them yet.