One Piece Headlights!!!!
Mtrujillo
03-09-2004, 09:50 PM
Hey were there ever 1 Peice hedlights for the Civic/CRX this guys trying to sell me some but I've never heard of such a thing, I know there are 1 Piece headlights for the Integra. But Ive never heard or seen any for the 4th Gen...So I was just wondering if anyone has heard of these or is this guy just pulling my chain
Ace$nyper
03-09-2004, 09:58 PM
yes the JDM 4 door had them they will fit with little work they look sweet like super clean clear corners imo
GTA
03-09-2004, 09:59 PM
the only one piece headlights are for the JDM 4 door 4th gen civic. they will fit with modification cause they are longer and narrower than a regular civic/crx headlight.
Mtrujillo
03-09-2004, 10:01 PM
So then you guys recomend me to get them ?? How much work do I have to do? I have a 91 CRX!
EF You
03-09-2004, 11:29 PM
its gonna take a lot more work to make it fit a CRX. look at the angle of your corner lights and then look at the angle of the hatch and sedan. the CRX corner is longer at the top and angles toward the front of the car toward the shorter bottom.
the civics are the opposite, with a long bottom and angling toward the front of the car toward the shorter top.
the civics are the opposite, with a long bottom and angling toward the front of the car toward the shorter top.
1PhatCX
03-10-2004, 02:15 PM
you can just get the hatchback fenders, bumper, hood etc.... and u wont have that corner light problem... unless u like customizing
marked001
03-10-2004, 03:53 PM
you can just get the hatchback fenders, bumper, hood etc.... and u wont have that corner light problem... unless u like customizing
it takes more than that.... like previously mentioned, the lights are longer and narrower.. a hatchback hood is the same as a crx hood..so that doesnt accomplish anything... at a bare minimum..some cutting, welding, and a little body work is gonna be req'd.
it takes more than that.... like previously mentioned, the lights are longer and narrower.. a hatchback hood is the same as a crx hood..so that doesnt accomplish anything... at a bare minimum..some cutting, welding, and a little body work is gonna be req'd.
Mtrujillo
03-10-2004, 03:57 PM
Thanks for all your help guys, I went ahead and ordered them, plus I also oredered the SIR conversion kit for my car, I dont mind a little body work in order to get them in there. just think of the outcome, completely JDM baby !!!!
Automotive Network, Inc., Copyright ©2026
