LS swap into 4g.. axle questions

can i use the axles from the 4g civic or do i have to use the intermediate shaft and axles from the integra?

i got a new intermediate shaft cause the one i had didn't fit.. it fits into the tranny but it's a little off on the block.. 3/4" too high for each hole actually. the new shaft is the exact same as the old one.

anyone had this problem?

can i use the long honda axle instead on that side?

yeah have to use integra axles. and the half shaft. its a common rule that you don't mix B with D.

i looked it up on teh hollander and it seems that I need a 94+integra or a 99 civic si, or 00 dohc civic, or any del sol intermediate shaft.. they're all the same one hehe, i thought del solds had a d series motor?

Which B18 are you using, (B18a1, B18b1)
I know you have to have the teg axles and front spindles.

use 91 teg axles and halfshaft...doesn't matter if its a b16a/b, b18a/b/c or b20a/b/z

I have a similar question really...I'm gathering the parts for the LS swap into my 88 hatch. I'm just wondering what axles to use for my 90-93 cable tranny. Any b-series right? Or, does it have to be like 90-91 that will fit into my hubs....i guess im just wondering which axles will fit into my 88 dx hubs. I've helped swap b-series motors into 92-95 civics...and the 99-00 axles slid easily into the 5th gen hubs. But, are 4th gen and 5th gen civic hubs the same? I think the 5th gen are a little bigger. correct?

i had a similar set up before...90-93 cable tranny/b18b LS motor/88 dx...i used 91 teg axles and intermediate shaft

i had a similar set up before...90-93 cable tranny/b18b LS motor/88 dx...i used 91 teg axles and intermediate shaft
yah, ill be running a 99 ls motor with a probably 91 cable tranny. Do I HAVE to use the 91 axles/int. shaft? Or, can the axles be used from any 90-93 teg? Or, can I just use ANY b series axles?

Use 90-93 teg axles and same year intermediate shaft for bseries swap on 4th gen civic...91 teg axle/91 teg intermediate shaft, 92 teg axles/92 teg intermediate shaft...and so on...

use 90-91 teg axles because they have no ABS