Replacing factory stereo

Was looking to replace factory stereo on a 1991 Accord. Do i need to pull out the whole dashboard to get the stereo out?

nope...
1. Remove ash tray.
2. Remove three screws, two above in front of frame one at back, securing ash tray frame.
3. Remove frame and disconnect lamp.
4. Remove two 8mm bolts that is supporting stereo bracket to dash.
5. Pull stereo forward, not to catch stereo bracket in ash tray opening. Disconnect antenna and wire harness.

sorry ,forgot to tell you that you will probably need a 90 degree screwdriver or a stubby phillips

Thanks.