Icecelle Blue Facelift FTO

Just thought I'd share my first model with you. I decided to make a replica of my real car after seeing Steves excellent job on his. The problem is nowhere does a facelift FTO, so I had to convert a pre-facelift model

I've very nearly finished the front end work
http://www.redmorris.pwp.blueyonder.co.uk/fto1.jpg

Just needs a few more touches and a good rub down before painting can start
http://www.redmorris.pwp.blueyonder.co.uk/fto2.jpg

All of this was done with putty. If I ever have to do this again I may use stylene!
http://www.redmorris.pwp.blueyonder.co.uk/fto3.jpg

awesome work!

Terrific craftsmanship!!!:)

Red, For a 1st model, you are doing really really well :)
The Fujimi FTO has loads of mold lines down each side, so make sure you sand them down well, or they will show through the paint.
Can you post a photo of the 1:1, to get an idea of what the finished model will look like.

Thanks guys. The support is appretiated.
Here's what it should look like, maybe not will look like as Steve suggested

http://www.redmorris.pwp.blueyonder.co.uk/ftoimages/fto11.jpg

Good luck with your first model and welcome to AF. You are making great progress so far.

Great effort on your first model

Welcome to AF :wave:

Great start!

damn i cant wait to see it done

Just a quick update. Today I laid down the primer and have put it back in the bubble to harden.
This is how it will stay for a week, so I'll be working on the interior
http://www.redmorris.pwp.blueyonder.co.uk/fto4.jpg

nice progressing!!

Even those first pics looks better than my first model! Wery impressive!

Looking mighty fine :)