Speedometer

94 Bronco,dash with gauges and electronic speedo. Removed cluster to replace bulbs , battery was disconnected, speedo. is now stuck on 90 MPH. Any Ideas?

remove it again and clean the connection where the harness plugs in and make sure it's plugged in all the way. sounds like some circuits got crossed.

Thanks for the reply,but thats not the problem. I know this because I fixed it. It seems that in the Ford electronic speedo. in a 94 Bronco has nothing to hold it in the 0 mph. position. Apparantly, while putting in the bulbs, I moved the cluster enough to swing the speedo. needle over center and it rested on the 90 mph peg. Removed the cover,moved the needle to 0,speedo. works fine.