Help. Turbo/exhaust problem

I really need help I am installing my turbo and it is kind of a custom job. The thing is everything else works but where you put the exhaust manifold on the trubo is further back than the manifold so I need a 2" exhaust manifold spacer and I dont know anywhere that makes them,,, help please!!!

Doesn't really make sense what you're saying. Sounds like the manifold doesn't have the right flange for the turbo. Did you make the turbo manifold yourself? A picture of what you are trying to do would really help.

Hey sorry 93hybridaccord bout not explaining it right, I was just in a lot of stress because I thought I threw away the grand i spent on my turbo. I meant that I took off the stock manifold. The turbo set up is al in one, the manifold down to the turbo and the exhaust port. Well, I went to place it all on an the manifold didnt reach the engine before my turbo hit the engine block so I needed a spacer for the 2 inch gap between the engine and the manifold for the turbo. I tried looking online everywhere and didnt find one. I also went to a machine shop to have one made and it would cost me 4 to 500. Well I went to work and I work with a bunch of machanics and he said well, why dont u just take 4 pieces of 2 inch long exhaust pipe and weld flanges on to each side and bolt it on. so i am good now sorry if i confused u. thanx