need help on installing clear corners!

hey i think that if i installed the clear corner lights that my car would gain alot of horse power. my friend told me it wouldn't affect my cars performance. i think that he is just plain dumb. anyways i'm having a hard time getting then in. do i need to take the bumper off to get at all the bolts or what am i doing wrong. thanx guys.

i also hear if you put on lots of NOS stickers on your car, it would send about 45 horsepower to the wheels

...

don't forget the neons, they give you more torque

94 + tegs front signals, remove the screw then slideout. unplug bulbs, and put into clearlights, screw back in. turn on light to check.

and if you close your eyes while doing 90 mph down the highway you start flying.:icon16:

"i also hear if you put on lots of NOS stickers on your car, it would send about 45 horsepower to the wheels"


comon now that just stupid. everyone know that the nos steering wheel cover gives you the most horse to your wheels. anyways i got my lights in and they look good. really cleaned up the front end. talk to you people later

94 + tegs front signals, remove the screw then slideout. unplug bulbs, and put into clearlights, screw back in. turn on light to check.


any one know how to get out a coner light from a 91 teg?? i took out the screw on the top near the coner panel, but it wont "pop" out????

it has two clips that hold it in. it should pull straight out after you get the screw out.

old thread

it has two clips that hold it in. it should pull straight out after you get the screw out.


I'm trying that, but it seems like if I pull any harder, ill break somthing!!

it looks like therres somthing else holding it on, that i can't get to!!

hahaha damn feb of 04 lol :chair:

i think he intentially brought it back because he had a question...

i think he intentially brought it back because he had a question...


Yea I did, I still cant get these things off, im starting to break plastic from inside the coner light cuase im pulling, and pushing to hard...

you sure there no other screw or anything Im not getting at??

Yea I did, I still cant get these things off, im starting to break plastic from inside the coner light cuase im pulling, and pushing to hard...

you sure there no other screw or anything Im not getting at??

Should only be one screw holding it in, and if you look towards in the inside of the light there should be a spot where you can easily put a flathead screw driver in there and just give it a few quick taps with the palm of you hand and it should come right out.

old thread
Exactly.


DJHyperXK2004,
In the future please just start a new thread.