Speedo roll back

anyone know how i can roll back my speed without breaking it i just got a speedo from a friend crx si-r (UKDM) cluster paid a little bit money so i dont want to break it. cause i know it is illegal in the states to have someone do it...please feed me in on some info i can do to roll it back to 0 for my new motor

i would just say dont do it but i dont know i've never tried but my guess is theres some way to get at the gauges themselves it should just roll you might have to go forward though which would suck

i hear peeps do it i just dont know how and wanna reset mine..friends saying i gotta break one piece off and super glue back but shit i dont wanna break something that costed a grip and hard to fine let alone

i'd atleast try it out on a junk cluster before doing it on your own. Just so you know what to do and what not to do if you go to do it on the sir one.

ok i rolled them back on a reg 90 crx si cluster...dont know if it will work..lol...but i know i didnt break anything...

not that ive ever done it :uhoh: but they arent hard to do...if your carefull and dont break anything..and wear rubber gloves so you dont leave fingerprints..... heheheheheh


gunnmen01

not that ive ever done it :uhoh: but they arent hard to do...if your carefull and dont break anything..and wear rubber gloves so you dont leave fingerprints..... heheheheheh


gunnmen01
:lol: :lol: :rofl: :rofl:

lol...righttttttttt

the way my dad did it.. separate the speedometer from the cluster. then he took a pocket knife.. stuck it in between the numbers. separated the numbers, and just rolled back the numbers. it worked fine after putting it in. just test things out on a junk cluster first.

the way my dad did it.. separate the speedometer from the cluster. then he took a pocket knife.. stuck it in between the numbers. separated the numbers, and just rolled back the numbers. it worked fine after putting it in. just test things out on a junk cluster first.
hmmm....dont get that.. really how do you pull the needle off without braking it, i pryd on that fucking needle on went know where before you can seperate the speedo from cluster

hmmm....dont get that.. really how do you pull the needle off without braking it, i pryd on that fucking needle on went know where before you can seperate the speedo from cluster
Use two spoons. Works real good. Just out them both under the needle (the base of it) and use the end of each spoon for leverage to push on.

or use a fork... slide the needle into one of the slots

Travis

sorry not picturing this anybody able take a pic so i can see what you mean sorry

Yea, isn't that a bit illegal? :-P

Actually, i guess i dont know for a fact, but ive definitly heard from more than one person that rolling back odometers on cars that are a certain amount of years old is not illegal. I think the number of years was either 10 or 12. Who knows if its definitly true, but i did it too. All the way back to 12,000. It feels so young :p

my odometer has been exempt. That is what my title says, anyway. So since it is exempt, does that mean that I won't get in trouble if I rollback or does the exempt mean something else??

My title is the same way. And its 10 years for PA atleast.

unless your good buddies with your inspection guy, then i wouldnt suggest doing this.

There is a sticker you get from a speedometer calibrtion shop that states the original miles on the car and the miles that are on the new spedometer...the sticker stays on the door jamb...
100% legal

just stick a drill in the speedo cable slot on the back... it'll take a long time, but at least u don't have to take the unit apart. i've tried taking the needles off, it was hopeless, i broke every one.