Help with newbi system

Anyone tell me if this will be a good start for my system

I have a 95 caddy eldorado, didn't touch the speakers yet, just going for the subs.

alpin deck, can't remember what kind off hand, came with the car.

2 audiobahn aw1206t dual voice coil, 1100 rms subs

1 audiobahn a8000t amp, 800@2 ohm rms

1 audiobahn 1 farad cap.

Got the whole setup for around $500 new with 1 year warranty so don't diss me too bad,I'm not a rich guy, puttin alota faith in audiobahn.

if anyone can help me on a box be much apreaciated.

if you don't care about how your music sounds, it would be a good system. I imagine it can get very loud

Think the amp will be enough to pump these subs for the time being, or should I start saving for another one so I can run one to each sub?

Bought a damn box and they don't fit either, mags are too big for a slanted box

those subs are dual 4ohm?
in that case, you're only sending 200 watts to each speaker. If you were to get another amp, you could send 800 watts to each. I'm not going to tell you what you should do, because if I were to do that you wouldn't like my answer, but you will get 4x the power by getting another one of the same amp.

Think the amp will be enough to pump these subs for the time being, or should I start saving for another one so I can run one to each sub?

Bought a damn box and they don't fit either, mags are too big for a slanted box
just put them in the other way so the mags are out of the box they look good like that and will not sound one bit different.
and then revers the polarity of the speaker connections.

Originally posted by sr20de4ever : those subs are dual 4ohm?
in that case, you're only sending 200 watts to each speaker. If you were to get another amp, you could send 800 watts to each. I'm not going to tell you what you should do, because if I were to do that you wouldn't like my answer, but you will get 4x the power by getting another one of the same amp.
WRONG WRONG WRONG

If the subs are dual 4 ohm then the amp will do fine ..it is rated at 800w x 2.. each sub can be wired in parallel to create the 2 ohm load that it is rated for...

Dont tell newbies how to do stuff if you dont know yourself.. :nono:

here is a pic of how to wire up you subs red is positive and black is negative.

hope it helps
http://files.automotiveforums.com/gallery/watermark.php?file=/503/1456214_dvc-med.JPG

WRONG WRONG WRONG

If the subs are dual 4 ohm then the amp will do fine ..it is rated at 800w x 2.. each sub can be wired in parallel to create the 2 ohm load that it is rated for...

Dont tell newbies how to do stuff if you dont know yourself.. :nono:

Audiobahn a8000t
Amplifier Type: Mono
RMS Power: 400W x 1 @ 4 ohms
RMS Power: 800W x 1 @ 2 ohms

*cough*
thanks....
maybe you should read a little more before bashing someone who does actually know what's going on

my bad..lowest ohm load possible : 2.75