testing individual fuel injectors?
cj99
02-24-2004, 08:15 AM
How can I test fuel injectors individually? I am going to do a pressure test on them on the car but how will I narrow it done to a particular one? Im suspecting one leaking thru.
chucksworld
02-26-2004, 04:17 PM
delete
Anaudiophile
02-26-2004, 10:25 PM
If you suspect one or more to be leaking. ie long cranking after sitting. Try running the engine for a minute, then shut if off and listen to each injector thru a stethoscope. If one has a little hiss that the others do not, then you've found the one that's bleeding pressure from the fuel rail!!
Just a thought.
Just a thought.
gforster
02-29-2004, 11:20 PM
I'm almost betting your working on a 3.0!
on most engines you can actually remove the entire fuel rail with the injectors still on and then jump the feul pump relay to power up the fuel pump, or use a scantool if you are real lucky, and you will see the ones that leak plain as day.
on most engines you can actually remove the entire fuel rail with the injectors still on and then jump the feul pump relay to power up the fuel pump, or use a scantool if you are real lucky, and you will see the ones that leak plain as day.
Automotive Network, Inc., Copyright ©2026
