bumper light wiring

i have a 97 accord, and i was wondering if anyone knows how to wire the bumper lights so they come on with the headlights, but still blink. I know if you wire them in with the corners they'll come on, but i dont know how to make them still blink, cause the corners dont blink. Holla back, and when my car is repaired i'll get to work. thanks!

what version of the accord do u get in hawaii ? USDM ? All usdm's will have 2 bulbs in the corner, one that will stay on, and one that will be on if not blinking.

yeah, it's usdm, but i think both bulbs stay on and dont blink, unless i'm crazy or something. I'll check when i get home today since my car is all banged up just sitting at home.

well you either have to put another bulb in there harness and everything by drilling a big hole or go to the auto parts store and get a dual filament wiring harness thing to replace the existing one, then wire them to your parking lights, then get a dual filament bulb to put in there. the bulb and harness in there is only single filament therefor it will only blink. the bulbs that light up and blink have two seperate filaments, one for lighting up and one for blinking.

Originally posted by toilet_ninja
yeah, it's usdm, but i think both bulbs stay on and dont blink, unless i'm crazy or something. I'll check when i get home today since my car is all banged up just sitting at home.

the one close to the headlight will stay on at all the times. the one behind it will be on with the headlights, and blink when the signals are on.

here's a link for 4th gens, i'd imagine it's almost the same http://www.hondasociety.com/board/showthread.php?s=&threadid=26601