hydraulic Clutch to Cable Clutch ???

I Have a hydraulic clutch in my honda civic.
and i just bought a B16A2 engine with cable clutch..

and i bought the cable clutch conversion kit off somewebsite..


did anyone ever do this before or know how to do this ?

and do i got to send my wiring harness out to get extended ?

B16A2's have hydraulic clutches. You must have got a B16A1.

no. u can get either.. cable or hydraulic.. and i got cable.

So your question is how to install it?

About the wiring harness, why do you need to extend it? Is it a JDM engine? Mine is and I had to extend everything to reach the ecu. I bought about 80 butt connectors and some 14-18 gauge braided wire and went at it, cutting/splicing all the wires. It took some time, but wasn't really hard.

yea its JDM Engine.. and i got a 94 honda hatch..
u sure i dont gotta get it extended.. what do u need to 2 do then ?


im gettin it from this website
http://www.ardperformance.com/cgi-bin/index.pl?action=index

the B16a2.. 170HP
$1700..

you think i will need to extend it ?

Yes you will have to extend it because in Japan the ECU is on the left side (our driver's side) and in our cars it is on the right side (passenger's side). So you will need about 3 little spools of different colored wire, 14 and 18 gauge, and about 80-100 butt connectors to splice the 30-40 wires together and extend them about 2 1/2 feet. I can't help you out with the cable clutch installation, but I'm almost positive the A2's all came stock with hydros. Cable clutches went out years ago man..

my prelude has a cable clutch (97). granted, the clutch in the 5th gen ludes is out of date and probably a bad decision on hondas part but...thats the way of the prelude i guess...

ok now for this is the thing, what do i extend, just the ecu wires or the whole harness. and what about vtec wires, they gotta be instaled to

Just the wires that go to the ECU.