new coils and no spark

Hey, i have a 95 cav with a 2.2 and it just got both of its ignition coils replaced and now there is no spark. it would start before this happened but it would have trouble and then i found out a coil was bad so i replaced both for safety, (both were the orginals) now i got no spark at the spark plugs. Any help or ideas would be appricated, Thanks.

replace plug wires or recheck you connection into the ignition module

yeah, thats been checked out and found to bee good but im still not getting a spark, any other ideas

replace the Ignition module and the crank shaft sensor located behind the module. i'm possitive this will solve your problem

Just don't break the Crank shaft Sensor!!

check the fuses before you waste a bunch of money on parts you don't need. if it worked before you changed the coil packs it's not working because of something you did while changing them. a wire might've backed out of the connector. try hooking up the old coils and see what happens. it's highly unlikely you have 2 new coils that are bad but i've seen some strange things happen.