upgrades before nos
lil_mac
02-06-2004, 05:36 PM
i was wondering what i needed to do to my engine before getting nos kit so my engine will support it. right now it just has an intake? My car is a 1995 acura integra se with 72000 miles.
PunkAlex
02-06-2004, 06:06 PM
Before making a nice big mod like this have your engine tuned and timed. Check for leakages and stuff. Thats my personal opinion though...
To run a 55 shot of nitrous, you should be fine on your stock motor...no problems. To run say a 75 shot, youll need a tad bit larger injectors and possibly new pistons and a stronger clutch. when you get bigger than 75, you WILL NEED pistons, rods, fuel management, and a head build (valvesprings, valves, head gasket, and possibly even nitrous specific cams).
To run a 55 shot of nitrous, you should be fine on your stock motor...no problems. To run say a 75 shot, youll need a tad bit larger injectors and possibly new pistons and a stronger clutch. when you get bigger than 75, you WILL NEED pistons, rods, fuel management, and a head build (valvesprings, valves, head gasket, and possibly even nitrous specific cams).
Ace$nyper
02-06-2004, 06:08 PM
also whole aftermarket catback and header will help it.
lil_mac
02-06-2004, 06:16 PM
so if i was to get a sneaky pete system i would be fine on my stock motor is that correct.
Ace$nyper
02-06-2004, 11:06 PM
yup just keep it at 55 you'll be fine
whtteg
02-06-2004, 11:28 PM
Just to warn you, the sneaky pete system is not going to be what you might think it is. It will only last maybe 2 1/4 mile runs with about a 35 shot. If you are serious avbout nitrous go with a wet setup. The LS will take 100 shots with a direct port wet kit, tuned properly, and used properly. I do not advise anybody to run 100 shot, but I have seen it done on stock block LS's alot here.
Now what you need to do to prepare for the nitrous, 1) read this http://www.automotiveforums.com/vbulletin/showthread.php?t=165711 post #4
2) post back with anything that is not answered by that post.
Now what you need to do to prepare for the nitrous, 1) read this http://www.automotiveforums.com/vbulletin/showthread.php?t=165711 post #4
2) post back with anything that is not answered by that post.
lil_mac
02-06-2004, 11:54 PM
im not really lookin for alot of nos just a little extra so do you think the sneaky pete setup would be good for that. i heard a dry kit was better for my car then wet.
lil_mac
02-06-2004, 11:55 PM
im thinkin like a 55 shot would be good for me
IntegraB18LS
02-07-2004, 12:32 AM
Sneeky pete is only good for about 1 run and you have to fill it up. to use a sneeky pete system you really need a filling station because you will be filling it alot. I have a 10lb nitrous bottle and 4an line (Run from trunk to engine) I also have a nitrous nozzle and fuel soliniod. you just need to get a small piece of 3an hose and a nitrous soliniod. it is the older style tank but still works good, just pulled it out of my fiero. I'll sell it for $150 ob plus shipping (Nitrous tank, line, bottle brackets, nozzle, fuel soiliniod) this way it will cost you about as much as a sneeky pete system but you will be able to hit the button more then once. PM or e-mail me if your interested. the bottle can be seen in the trunk of my fiero on page 6 of my cardomain site.
Kyle
Before using nitrous I would get Iridium spark plugs, make sure your timming is at stock position - do not advance it at all. I would get some sort of adjustable fuel pressure regulator. and that should be the basic upgrades you will need.
Kyle
Before using nitrous I would get Iridium spark plugs, make sure your timming is at stock position - do not advance it at all. I would get some sort of adjustable fuel pressure regulator. and that should be the basic upgrades you will need.
lil_mac
02-07-2004, 01:11 AM
is there anyone with a good 50+ shot dry nitrous kit for sale, one that isnt going to cost my too much???
PunkAlex
02-07-2004, 08:59 AM
Isnt there a way to build your own nitrous setup? like building your own turbo setup? i mean the edelbrock catalog has all the equipment needed to, with different nozzle sizes and stuff. It would be cheaper than to buy a premade setup.
whtteg
02-07-2004, 11:42 AM
Isnt there a way to build your own nitrous setup? like building your own turbo setup? i mean the edelbrock catalog has all the equipment needed to, with different nozzle sizes and stuff. It would be cheaper than to buy a premade setup.
That is exactly what my kit is, except it is NOS brand parts :icon16: But when you add it up you really won't come out better unless you can find some of the parts used ie: the bottle, brackets, and hoses. The rest you can buy fairly cheap the biggest cost will be the solenoids.
BTW lil_mac did you read that link I gave you?
That is exactly what my kit is, except it is NOS brand parts :icon16: But when you add it up you really won't come out better unless you can find some of the parts used ie: the bottle, brackets, and hoses. The rest you can buy fairly cheap the biggest cost will be the solenoids.
BTW lil_mac did you read that link I gave you?
lil_mac
02-07-2004, 03:25 PM
Yes I Read Your Link And It Answered All My Questions Thanks
lil_mac
02-07-2004, 03:27 PM
Now I Just Need To Find Out What Kit To Get! Any Ideas For My Car??
lil_mac
02-07-2004, 03:30 PM
What Is All Included In A Nos Kit So That I Can Look Up The Parts And Possible Build My Own Kit??
whtteg
02-07-2004, 04:02 PM
Wet or Dry?
got v-tec?
02-07-2004, 04:14 PM
Now I Just Need To Find Out What Kit To Get! Any Ideas For My Car??
stock parts will be fine for a 55shot mabie get msd ignition and zex dry is by far the cheapest. you can get it on ebay for as low as 450shipped(new) or about 200 used.
stock parts will be fine for a 55shot mabie get msd ignition and zex dry is by far the cheapest. you can get it on ebay for as low as 450shipped(new) or about 200 used.
lil_mac
02-07-2004, 11:44 PM
dry
lil_mac
02-07-2004, 11:54 PM
the zex kits on ebay i have seen run 350-400 used and around 500+ for new
got v-tec?
02-08-2004, 03:08 AM
the zex kits on ebay i have seen run 350-400 used and around 500+ for new
i got mine for $450)new( shipped and my friend just got his for 300 used
i got mine for $450)new( shipped and my friend just got his for 300 used
Automotive Network, Inc., Copyright ©2026
