Solenoid Pack Remove???

All,

:98 Grand Voyager 3.3L 4SPD tranny

All the solenoid pack is leaking on my van.

Anyways - I'm down to removing the final bolt on the solenoid pack. There is one bolt on the back of the pack underneath what I think is the TCC solenoid.

How is the last bolt removed? I've tried a swivel socket attatch to the rachet and an offset box end wrench, but nether have enough clearance.

Is the TCC solenoid to be removed from the tranny to access that bolt? If so does anyone know what size socket it takes? THe biggest I have is an 15/16SAE and 23MM.


Thanks!

That is not the TCC solenoid but is the Input Speed Sensor. I have had to remove them on occasion to access that bolt so I know what you're talking about. I forget what size I think 24 mm. I just used a big crecent wrench.

any precautions to removing the input speed sensor? is it just an unscrew, then screw back in?

thanks for the repy gforester