Cefiro chamber and alignment troubleshoot.

Hi All,

I am facing problem with my chamber and alignment for rear wheels. Lately, I’ve changed to HKS Hyper Damper absorbers and of course my car is lower comparing to stock absorbers.

I want my car to be low and at the same time I want my chamber to be about –0.5 degree. I did alignment and chamber after fitting in the HKS absorbers, but the workshop fellow told me he tried everything to get –0.5 degree, but unsuccessful. The reading now is about –3.0 degree on both sides. I have the toe alignment problem on the left rear but not the right one. Any GURU here can advice me what to do? Any replacement kit for the bolts and nuts? The workshop recommended me to change the whole lower arm kit to RB25 4WD. Does it fit?

Thanks in advance.

you should get the rear adj. camber link/arm/rod/kit together with the rear adj toe link/arm/rod/kit and rear traction link/arm/rod/kit. so that you can dial-in the numbers u need. you can use the S-13,silvia, or S14 aftermarkets.