Mods for the Geo metro

I have a 95 Geo Metro, WHen I was dating my wife she had it, i laughed when I poped the hood the first time. But this is a very good car. It has 90k miles on it now and I drive it every day. It is very nimble, especially in Dallas traffic. It only has the 3 cyl and I was wondering if there was anyone who knew of some mods i can put on this car to make it just a little faster, I.E. 4 cyl motor, Storm motor, anything (besides nitro).. Any ideas would be apreciated :sun: in my Geo

You could probably fit a turbo and intercooler from an older model firefly or sprint.

Do you know what the horse power specs are for the 1.0 ltr 3 cyl?

A Geo Metro has a little more power than a Corvette starter motor (around 50-60 hp). Unfourtunatley, the little 1.0 cannot stand too much improvements in efficiency without the internals being damaged.

How much HP did the 4 CYL have any and all Geo/Suzuki?

the 3cyl has 55 stock, and the 4cyl has around 70 i think

I have a 95 metro 1.0 as well and found a website (www.surbo.net) that sells a devise that attaches in the intake pipe and gives a torque boost IF your car has a manual transmission. I bought and installed the surbo, and after some practice, (there is a throttle sequence that needs to be learned), the car has much better acceleration.

I have a buddy, owned a Geo Metro 1L 3 cyl. He was pushing 225 hp out of the 1L and was smokin GSRs....Umm..he is an auto mechanic and spent alot of time doing lots of internal work, i don't think it cost him to much, i would say he only spent like 1-2k in actual parts, the rest was all labor, porting and polishing his own head, new high lift cams, milled head, intake, custom header, no cat, custom exhaust....That thing was sweet, don't know why he sold it though

Well first off with the metro..you could sell it..and thats about it. It would probably be the best move anyone would ever make.

Originally posted by 90StormGSI
I have a buddy, owned a Geo Metro 1L 3 cyl. He was pushing 225 hp out of the 1L and was smokin GSRs....Umm..he is an auto mechanic and spent alot of time doing lots of internal work, i don't think it cost him to much, i would say he only spent like 1-2k in actual parts, the rest was all labor, porting and polishing his own head, new high lift cams, milled head, intake, custom header, no cat, custom exhaust....That thing was sweet, don't know why he sold it though

I'd need a dyno chart or a time slip to believe that he pushed 225 horse out of the 55 hp stock metro 3 cyl, only spending 2k at the most. I'm calling BS on this one until i see proof. :bs:

Originally posted by JasonAccord98LX


I'd need a dyno chart or a time slip to believe that he pushed 225 horse out of the 55 hp stock metro 3 cyl, only spending 2k at the most. I'm calling BS on this one until i see proof. :bs:
he acually meant to say a turboed vtec was in there, THERE IS NO WAY IN HELL THAT A PEICE OF $*It LIKE THAT COULD PUSH 225 EVEN WITH MODS...........

I dont know if its posible....but why do engine MODs when you could put a better tranny in it........Get a tranny with a better top end on it. It seems logical to me, but trannys dont always come at a cheap price. The only other Idea I had was get the head redecked, get new Bosch spark plugs, and maybe a new coil and distributor......thats all I can think of for a car that size! :bigthumb:

A can of gasoline and a match can help that car out a lot!!!!

I would get a K&N air filter 8mm wires bosh +2 plugs (don`t get +4s unles you want to buy new pistons) a hi flow cat and a hi po coil would give you some more power and better gas mi :wink:

Dont listen to any of this shit man. There is a suzuki engine, 1.3 liter twim cam, that came on the suzuki swift gt or gti I think. There are a lot of mods out there for this engine plus it comes stock with 100hp, almost TWICE your stock HP:bigthumb: I have seen them in slavage yards. hope that helps!!

65 BISCANE!?!?! Oh man I just remember reading an article on hot rod of a 62 biscane with a twin turbo v8 pushing 1200hp... :eek:

I can only wish I had that one I don`t have the same frame though it changed in 65 :rolleyes: I didn`t know about the duel over head cam engin until after I posted and I was thinking of cheep one day mods :smile:

Maverick, When I said dont listen to all this shit I wasnt talking about your advice or anybody elses who gave some thought to what they wrote, I was talking about all the trash talk, like selling or burning the car. Im sure your ideas, on with the suzuki engine would work out a kick ass little car. All it would need is a serious suspension work, because the "nine inches off the ground stance" doesnt look so good.

I have a buddy, owned a Geo Metro 1L 3 cyl. He was pushing 225 hp out of the 1L and was smokin GSRs....Umm..he is an auto mechanic and spent alot of time doing lots of internal work, i don't think it cost him to much, i would say he only spent like 1-2k in actual parts, the rest was all labor, porting and polishing his own head, new high lift cams, milled head, intake, custom header, no cat, custom exhaust....That thing was sweet, don't know why he sold it though

it was a geo, geos are pathetic and people laugh at them thats why he sold it