B16 Swap questions

i am ready to buy my motor from hmo but i don't know witch one to buy. The complete changeover, or the Motor, Tranny, Computer one...? iam going to buy the hasport mounts and shift linkage, and i am wondering if i should buy the wiring harness, is it really that hard without it? and does anybody know if the motor comes with the correct axles? its going in a 88 DX Hatch.and is this site a good source for motors? thanks for your time...

Is what a good site for motors?! HAsport?

You want the 1st gen B16A, with the cable tranny and non-OBD computer. The wiring should be pretty straight forward.

nah siz, he's getting from hmotorsonline, yea get the whole changeover, they will send you the right ecu, the right axels, and unless you feel like running damn near a mile or so of wires through your car, get the damn harness.

I bought a b16a complete changeover, knuckles, hubs, HaSport mounts and linkage for my CRX HF... yah they can hook you up right. Good prices too!

ok... so the complete change over it is, but do i need the knuckle and hubs, or not, cause i don't know if i need those? and what exactly are they for?

I bought a b16a complete changeover, knuckles, hubs, HaSport mounts and linkage for my CRX HF... yah they can hook you up right. Good prices too!

:1: us too

since you have a dx you need to upgrade to MPFI as well. the vtec part of it is actually easier than the MPFI :screwy:

jer has been making quite a few harnesses lately. he could make you a MPFI & vtec harness :naughty:

doesn't the wire harness from hasport include the VTEC and MPFI wiring in the one harness or no? How much could he make me a harness for?