2 Piece 4-2-1 Header Question
SenseiAccord
01-22-2004, 02:39 AM
You know when installing these kind of 2 piece headers... I kno u need a gasket connecting the header to the engine but what about the header connecting to the down pipe and then the down pipe connecting the the cat? Do you need a gasket between the header and the down pipe and from the down pipe to the header??? By the way i have a DC 4-2-1 for a 90 accord ex. I bought it used so it doesnt come with any gaskets.
tibby01
01-22-2004, 02:54 AM
you should usually have gaskets between each connection along the exhaust.
steve8091
01-22-2004, 01:02 PM
Unless you (or someone else) has taken them out, you should already have gaskets in these locations. If they are worn, physically take them into an auto supply store to find a replacement. But yes, you certainly need gaskets. Without them, you will lose a good portion of your exhaust before it even hits your muffler.
SenseiAccord
01-23-2004, 02:19 PM
Unless you (or someone else) has taken them out, you should already have gaskets in these locations. If they are worn, physically take them into an auto supply store to find a replacement. But yes, you certainly need gaskets. Without them, you will lose a good portion of your exhaust before it even hits your muffler.
I thought u cant reuse gaskets once u've used them?
I thought u cant reuse gaskets once u've used them?
steve8091
01-23-2004, 04:00 PM
I wouldn't recommend reusing a header gasket, or something similar, as they deform significantly when loaded. The piping gaskets are made of a thick, hard, insulated material, and don't deform very much when the bolts are torqued. I don't see any issue reusing them (I've done it).
SenseiAccord
01-25-2004, 04:15 AM
so does DC 2 piece headers use stock gaskets to install? Do they sell all necessary gaskets at like checkers or something?
Toke138
01-27-2004, 05:13 PM
My DC header came with a single gasket that went between the 2 piece header, the rest used stock gaskets.
lunatix
04-25-2008, 08:32 PM
my gaskget just got mess up for the 4-2-1 and the 2 gaskget is the one that got mess up any one knows where to get that at bc i search all over and they dont have it and crap its for a honda accord LX 2000 4cyl
lunatix
04-28-2008, 10:36 PM
i need to know where i can get gaskets for 4-2-1 headers for my honda 2000 4cyl i cant find them no where does any one know any sites that i can find them at plz help ??
wiseguy01
04-29-2008, 01:59 AM
try starting a new thread just to let you know dead threads never get responses so start a new one and you will get more responses when i mean dead thread more than three months old
eckoman_pdx
04-29-2008, 03:13 AM
lunatix, this thread has been dead for 4 years. Please start a new thread with your questions and they will be answered. Thank you.
Automotive Network, Inc., Copyright ©2026
