indiglow guages

I have a 95 eclipse rs and i just got these reverse indiglow gauges but have no idea how to install them. I know that the needles can get out of calibration if I mess with them, but I want to try it myself and save myself the expenses.
If it isnt too difficult, can someone post me some installation directions or tell me a rough estimate of how much it would cost to get them installed professionally. Any help is greatly appreciated.

Thanks a lot!!!!!!!! :biggrin:

The hardest part of it will be pulling off the dash and other stuff. Everything after that should be plug and play. The only trick is finding all the screws and taking them out. To have it installed shouldn't cost you more than 50 or 60 bucks, maybe less. Good luck and enjoy the guages!

check out ebay... i got mine there and they cost me around 30 with shipping. These gauges slip over the needles so the cant mess up, and if you are worried take a picture before you start so you know where the needles are and then you have that just incase :)

There is already a post on this, just look back through the threads about a month. Boostedspyder wrote up installation on these and posted pics in his website.

this is the thread http://www.automotiveforums.com/vbulletin/showthread.php?t=168199&highlight=gauges i did a couple weeks ago, check page 2 in the link in my sig for a pic of the wire to splice. removing the dash isn't that hard, there are 2 bolts in the upper bezel, and 4 around the cluster. it took me 1.5 hours cuz i was a lagger and i had absolutly no instructions... hope that helps